YX60-750 Roll Forming Machine
Main specification:
1: Coil width: 970mm effective width: 750mm
2: working speed: 15-25m/min (not contain cutting)
3: roll station: about 33stations (according the final design)
4: material of roller: 45# steel, polished and coated with chrome
5:material of main shaft:45 # forge steel diameter roller: Ф70mm
6: main power: hydraulic drive
7: forming thickness: 0.4-0.8mmGI up to 235Mpa
8: Transmission: by single Chains 1.0 inch
9: feeding and guide: surface polished and coated with chrome
10: machine adopt wall panel
11: color of machine: blue and yellow
A: Cutting:
(1) Hydraulic Cutting after forming: Cut the sheet after roll forming to required length
(2) Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.
(3) Material of blade: CR12with heat treatment
(4) Length measuring: Automatic length measuring
(5) Tolerance of length: 3m+/- 1.5mm
B. Manual decoiler
Dimensions: 1700mm*1000mm*800mm
Width of feeding: 1250mm
Capability: 5 Ton
Bound of expand &fight: 480mm-570mm
Mode of expand &fight: inner expand &fight by manual
Way of feeding: manual
C: Control panel Panasonic
(1) Voltage, Frequency, and Phase: Machine need to accept 380V/3Ph/50Hz
(2) Automatic length measurement:
(3) Automatic quantity measurement
(4) Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
(5) Length inaccuracy can be amended easily.
(6). Control panel: Button-type switch and touch screen
(7) Unit of length: millimeter (switched on the control panel)