CW6628X4000 Oil Country Lathe Machine

• After-sales Service: 1 year
• Warranty: 1 year
• Type: Horizontal Lathe
• Model NO.: CW6628x4000
• Processing Accessory: oil pipe
• Guide Rail: Horizontal Guide Rail
• Tool Holder: 4 Stations Tool Post
• Power Source: Electric
• Controlling Mode: Artificial
• Automatic Grade: Manual
• Setting Mode: Floor-type
• Precision: Precision
• Condition: New
• Transport Package: Wooden Pallet
• Specification: CW6628x4000
• Trademark: HAVEN
• Origin: China
• HS Code: 8462
• Production Capacity: 200units/Year

Product Description

                                               CW6628X4000 Oil Country Lathe Machine





Main feature:
1. Bed
The bed is a basic component of the machine, and its rigidity directly affects working performance and accuracy of the whole machine. The bed are made by the press of resin sand mould and the materials of high quality iron casting and this has excellent exterior and strength. The bed also has features of strong rigidity, anti-shock ability and anti-section deformity ability because of the construct of -typed ribs and the process of 450 side and rear chip removal. Width of guide-ways is 600 mm, this dimension is very bigger, and it has a better anti-subversive capacity when cutting large-sized swiveling work-pieces. The bed has V-typed and flat guide-ways for longitudinal traverse of the apron and tailstock.
2. Spindle box
The spindle box is a construction of whole box. The movement of main motor will be transmitted into the spindle box through V-belt. The change of moveable gear is adjusted by control handle, the range of spindle speed is 5 to 315 r/min. The transmits of main drive has two advanced roads, which is separated for high speed and low speed, so wide range of spindle variable-speed is realized economically and effectively. This driving system has characters of big torque output
3. Tailstock
The tailstock is consisted of up and lower bodies. The sleeve, spindle, manual and rapid traverse mechanism for sleeve, and adjusting spindle center line mechanism of the tailstock are wholly installed in the up body, the stopping mechanism is installed in the lower body. The tailstock can do longitudinal traverse along the guide-way of the bed, and it can support all kinds of work-pieces, and mechanical locking fastness will be realized, it is safer and more reliable.
4. Saddle and tool post
Main functions of this part by the frame of reference of the spindle finish various kind of feed. To prevent the feed of saddle from climbing longitudinally, a pair of guide-ways of the saddle has stuck with plastic guiding plates of high performance, the problem for cross and longitudinal combinational traverse has thoroughly been solved in the construction of longitudinal and cross branch, reliability of the machine is raised greatly. In additional, the up tool post can cut different taper within the effective travel.
5. Taper turning device
This device is installed at the end of the saddle, it can drive the saddle and tool post to turn taper ≤ 20° , length of the taper ≤ 300 mm, so it can turn pipe threads conveniently and reliably. Also this device with the length 800mm can be equipped with.
6. Feeding device (Out board support)
In order to clamp the pipe conveniently, the feeding device is installed in the saddle, and a handle is set on it. When moving the handle with hand, this pipe can go from chuck to rear chuck through the spindle hole automatically, easy for clamping the pipe, at mean time, the pipe which has been machined may be unloaded from the front or rear chuck, the device can be selected more according to the length of this pipe. This device has function as roller supporting, it can support long pipe.

Main specification:

Model	CW6628	CW6636		CW6646
Max swing over bed	1000mm	1000mm		1200mm
Max swing over carriage	640mm	640mm		900mm
Distance between center	1500-16000mm
Width of bed	600mm	755mm		970mm
Dia of spindle inner hole	280mm	360mm		460mm
Min clampe dia of chuck	50mm	200mm		250mm
Range of spindle speed	5 to 500r.p.m		3.15 to 315 r.p.m.
Kind of metric thread and pitch range	56 kinds  1 to 120 mm
Kind of Whitworth thread and range	37 kinds30 to 1.125 teeth/in.
Kind of modular thread and range	46 kinds  0.5 to 60 mm
Kind of radial thread and range	46kinds  0.5 to 60 D.P.
Tool section ( H×W )	32X32mm	45×45 mm		45×45 mm
Max. travel of tool post	200 mm	200 mm		200 mm
Max. travel of cross slide	600mm	520 mm		620
Diameter of tailstock sleeve	120mm	160 mm		160mm
Travel of tailstock sleeve	250mm	300 mm		300 mm
Taper for taper hole of tailstock sleeve	Morse No.6	Metric No. 80		Metric No. 80
Machining length of taper scale	Taper turning, ±1:4
Main motor	AC18.5KW	AC22KW		AC30KW