Type: | Horizontal Lathe |
---|---|
Processing Accessory: | pipe and flange type metal workpiece |
Guide Rail: | Horizontal Guide Rail |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Specification | ||
C6241 | C6246 | |
Distance between center | 1000/1500/2000 | 1000/1500/2000 |
Swing over bed | 410mm(16" ) | 460mm(18" ) |
Swing over cross slide | 220mm(8-13/16" ) | 270mm(10-3/4" ) |
Swing in gap | 640mm(25-1/8" ) | 690mm(27-1/8" ) |
Valid length of gap | 165mm(6-1/2" ) | |
Width of bed | 300mm(11-13/16" ) | |
Headstock | ||
Spindle nose | D1-6 | |
Spindle bore | 58mm(2-1/4" ) | |
Taper of spindle bore | No. 6 Morse | |
Range of spindle speed | 12 changes, 25-2000r/min | |
Feeds and threads | ||
Max. travel of top slide | 128mm(5" ) | |
Max. travel of cross slide | 285mm(11-1/4" ) | |
Max. section of tool | 25× 25mm(1" × 1" ) | |
Pitch thread of leadscrew | 6mm or 4T. P. I. | |
Longitudinal feeds range | 42 kinds, 0.031-1.7mm/rev(0.0011" -0.0633" /rev) | |
Cross feeds range | 42 kinds, 0.014-0.784mm/rev(0.00033" -0.01837" /rev) | |
Metric threads range | 41 kinds, 0.1-14mm | |
Inch threads range | 60 kinds, 2-112T. P. I. | |
Diametrical pitches range | 50 kinds, 4-112DP | |
Module pitches range | 34 kinds, 0.1-7MP | |
Tailstock | ||
Dia. of tailstock sleeve | 60mm(2-5/16" ) | |
Travel of tailstock sleeve | 128mm(5" ) | |
Taper of tailstock sleeve | No. 4 Morse | |
Motor | ||
Power of main motor | 5.5kW(7.5HP) 3PH | |
Power of coolant pump | 0.1kW(1/8HP) 3PH |