3200t Hydraulic CNC Electro-Hydraulic Synchro Press Brake

• Warranty: 1-year
• Condition: New
• Automation: Automatic
• Model NO.: 2-WC67Y-1600x6000
• Type: Press Brake
• CNC Type: Tander Press
• Application: Machinery & Hardware, Textiles
• Type for Fold-bending Machine: CNC Fold-bend Machine
• Type for Cutting Machine: Bending Machine
• Transport Package: Steel Pallet
• Specification: Total 3200t, 12000mm
• Trademark: HAVEN
• Origin: China
• HS Code: 8459
• Production Capacity: 30 Units/Month

Product Description

1 The frame of machine is composed of tank, worktable, left and right housings and RAM. So it has high strength and good rigidity. Also it takes vibration to eliminate Stress.

2 Synchronization working principal of both machines: Adopting electric-hydraulic Proportional valve to ensure the synchronization of both machines. The proportional valve is made by BOSCH company with very good performance such as small friction between mechanic action pairs, fine electronic amplifier and electric magnet with high controlling force and continuous action.

There are two raster displayers on both sides of machine to inspect the position of RAM continuously and feed back the signal to control system, then the control system will control electric-hydraulic valve to make two cylinders synchronization on one machine. Because the raster displayers are installed to "C" plates, not on housing plates directly, the deflection of RAM and frame when working will not effect its measuring and controlling precision.

When two machines working together, the differential potentiometer installed between two machines will transfer the mechanic synchronizing signal into electronic one and feed back to synchronization plate and control system. The signal will be enlarged by BOSCH amplifier to control the synchronization of both machines by controlling electric-hydraulic proportional valve. So the synchronization of two machines is achieved with high precision.

3 Through computer, the operator could communicate with machine. The computer has several service language, calculate and adjust the bending force automatically. Also it could calculate and control the dead point, speed changing point. The strokes (Y1, Y2) of RAM could make a small tilt to meet the special requirement of user.

4 Equipped with good guiding system, position measuring system and hydraulic balance system to meet the requirements of full length job and eccentric job.
5 Worktable compensation unit is adopted to make up for deflection of machine when working to make sure the precision of work piece.

6 The surface of cylinder has good wearing and heat treatment, so it has good lubrication and long service life.

Type		Mult-machine Tandem Hydraulic CNC electro-hydraulic synchro
Working force		2X1600Ton
Length of table		2X6000mm
distance between frames		4800mm
Throat depth		1600mm
Open height		1300mm
stroke		450mm
Working Speed	Unload	70mm/s
	Working	6.5mm/s
	Return	65mm/s
Main motor		2x2x55Kw
CNC system		Type: DELEM DA65W Delem Co., Netherlands 2 Axis(Y1,Y2) Y1 , Y2 Axis------Two raster displays installed at both sides of ram to control cylinders.
Tool		With 1 punching and 1 bottom die The bottom die is open width adjustable type as attached photo
Seal in the cylinders		NOK, made in Japan
Hydraulic components		BOSCH-Rexroth - , Germany
Hydraulic pump		Nitch , Japan, or BOSCH , Germany,
Linear Raster displayer sensor		HEIDENHAIN, GERMANY
Main Electric Elements in cabinet		Schneider
Gross weight		2x190000kg(net 180000Kg)
Profile dimension (mm) LxWxH		2-6240x5350x7100
Packing:		With plastic cover The machine should be disassemble during transportation. Our engineer should go to customer to assemble and adjust it.
Accessories As photos		Motorized front support 1 set (4 units) Motorized back support 1 set (4 units) Chain structure work piece unload device
OPTION		DA52 CONTROLLER